With our wealth of experience in the field we like to think we are capable of catering for all your requirements however large or small and diverse your project is, leading you through all the necessary stages to a pleasing end result.
It all starts once we receive your brief. The more detailed it is, the easier and most importantly the accuracy our design solution will be, effectively forfilling your expectations.

Important questions which help us to conclude your requirements would be -

  • Stand space details - so we can obtain a site plan from the organisers ruling out any issues we may have as to where the services come from. In addition we can also confirm the days for the build up and strip out as this may dictate how involved the stand can be with a restricted time scale to install and strip it out after the event.
  • Budget - this is most important, whilst our designer loves to create ideas without a budget in mind, sadly most proposals are in fact governed by the budget.
  • What you would like from the stand? Information desk, store, kitchen with fridge dishwasher etc. Meeting room, seating area, there are a number of options available.
  • If you have had a stand in the past it's always useful to know how it worked, so we can improve and eliminate any previous issues you may have had.

This all helps us to come up with an accurate and acceptable proposal for you within your allocated budget effectively giving us the best chance possible to win your business.


 
Your Brief
Using the latest computer aided design software we offer free no obligation design and quotations. Creating 3d visuals so you can experience the reality of the design prior to manufacture. Moving onto producing technical drawings of all the elements fully detailing all the finishes so all is covered at the drawings stages and manufacture can proceed with all the boxes ticked and approved.
Drawings can then be developed showing all the areas available for graphics which are then superimposed onto the visuals confirming all the positions and that you are happy prior to them being fitted on site.

 
Design
Manufacture
With a wealth of experience in our workshop, our carpenters are ready for their next building challenge. We like to make life easy through using the latest CNC'ing technology to produce all shapes and sizes, components broken down and CNC programs produced in house.
Recently investing in a hand held edge bander means we can now wrap a durable ABS edging around any shape up to 40mm wide.
Once all the components are manufactured, at any point you are welcome to visit and see it progress. Depending on the design many elements will be fully proven and put together in our workshop eliminating any hitches which may occur on site, effectively making the on site build run as smoothly as possible.


 
Installation
With a fully national and international operators licence combined with a vast amount of experience within transport, we can either use our own 7.5 tonne lorry or organise the correct size vehicle to transport all to site. Once the first load has been transported and constructed depending on the size subsequent elements will follow throughout the days of the build, leaving all the valuables until the final day.
Our team again take care of all through constructing the stand to decorating and fitting large format graphics. Finally once the construction is complete we give the stand our personal clean before final handover.
At the end of the event the stand is stripped out and wrapped sufficiently to incur no damage should elements be required for subsequent events.


 
Once back with us, all elements can be stored in our storage facility. We have 12,000sq ft of in house storage, secure and fully water tight. Racking has been installed to enable items to be stored efficiently. All available for a competitive rate, please call or email us for more details.


 
Storage